PU Open Belts Welding Machine & Complete Tools
Start Offering Different quality PU open belts
July 13, 2023Carbon tensile cord increases power rating
July 13, 2023
| MACHINES & TOOLS | TYPE | NOTE | EXPLAIN |
| PU TIMING BELT THERMOWELD (JOINTING MACHINE) | TBA350 | BELT MIN JOINTING LENGTH 1300 x MAX WIDTH 150 mm | TBA350 is suitable for all belts, but minimum belt jointing length is 1300mm. If pitch equal or more than 14mm ( HTD14M, RPP14M, T20, AT20, XH), only can use TBA350. (Smaller sizes 3M, 5M, for example, their usually jointing length less than 1000mm, so TBA350 can not joint.) |
| TBA250 | BELT MIN JOINTING LENGTH 650 x MAX WIDTH 150 mm | TBA250 is suitable for belt pitch less than 14mm (T2.5, TT5, T5, AT5, T10, AT10, H, L, XL, 3M, 5M, 8M), but minimum belt length is 650mm. | |
| TBM | BELT MIN JOINTING LENGTH 350 x MAX WIDTH 50 mm | TBM is suitable for belt pitch less than 14mm (T2.5, TT5, T5, AT5, T10, AT10, H, L, XL, 3M, 5M, 8M), its minimum belt length is 350mm, but for finger joint length only have 50mm (cutting length), so it doesn’t with big strengthen, just complete the lengths which without truly endless type. | |
| PU TIMING BELT JOINTING MOULD | TM350 | FOR JOINTING MACHINE TBA350 | Each type of belt should use one mould, the tooth shape are different. For example, TM250 – H type, maximum welding width 101.6mm, then you can weld all H size which equal or less than 101.6mm. (Not like Megadyne, each type and each width has a mould, there will be too many moulds.) |
| TM250 | FOR JOINTING MACHINE TBA250 | ||
| TMM | FOR JOINTING MACHINE TBM | ||
| PUNCHING SHEAR | PS-T22T | 22 Tons Press, fully-automatic | This machine is for cutting the tooth on belt. We weld the belts in Finger Joint method. Before jointing, you need to cut length as you need. For example you have H – 50meters on stock, customer require 10meter, you may use the Punching Shear and tooth tool (CT250-H) to cut the belt into right length. |
| PS-T20T | 20 Tons Press, Self-automatic | ||
| TOOTH TOOLS | CT350 | Pitch (Teeth gap) ≥ 14mm | Tooth tools just like cutter in finger way. Different belt pitch should choose different tooth tools. It’s using on Punching Shear. We recommend each belt type use one tooth tool. But actually some types can use one tooth tool, for example, T10 and AT10 can use the same tool. We’ll tell which tooth tools you should need if you let us know what belt types you’re going to cut. |
| CT250 | Pitch (Teeth gap) ＜ 14mm | ||
| CTM | Pitch (Teeth gap) ＜ 14mm | ||
| BELT DIVIDING SHEARS | DSVS-14 | For Open belt, Max cutting width 14 inches | Dividing Shears is for cutting the Width of belt. For example you have H – 101.60mm on stock, customer require 32mm, you may use the Dividing shears to cut the belt into 32mm width. |